Hardman's Double/Bubble® Very High Peel Strength Epoxy

Description: A flexible, tough and durable, vibration-resistant adhesive. High peel and shear strengths. Bonds to polystyrene, ABS nylon, metal, wood, masonry, and rubber. Each packet will shaft a minimum of 3 clubs for Golf—the same material as the G-300 Series.
Typical uses: Repair sports equipment, marine, aircraft auto, truck, and tractor parts. Excellent adhesive for grinding wheel hubs, door, and window gaskets.
Work time: 3 hours
Handling strength: 18 hours
Color: Gray
Viscosity: Soft paste
Part Number: 04007

HARDMAN High-Peel-Strength Epoxy is a semi–rigid, two-component structural epoxy adhesive. It develops an excellent shear and peel strength combination with only a room-temperature cure. It has excellent shock resistance, vibration resistance, and impact strength.

HARDMAN High-Peel-Strength Epoxy is recommended for the following substrates:

Metal

Carbon Steel
Stainless Steel
Aluminum
Copper/Brass
Tin
Zinc

Plastics

PVC
Polystyrene
Nylon

Rubber
Stone
Wood
Glass
China
Leather

HARDMAN High-Peel-Strength Epoxy can be used to repair sports equipment, marine, aircraft, auto, truck, and tractor parts. It is an excellent adhesive for grinding wheel hubs, industrial parts, and door and window gaskets.

PACKAGING

The DOUBLE/BUBBLE package is a handy, dual-pouch, one shot, job-size packaging concept. It reduces the waste typically associated with using larger quantities of two-component adhesives. This unique packaging ensures that DOUBLE/BUBBLE adhesives are always factory fresh and accurately portioned for optimum adhesive performance.

Directions for Use

The surface must be clean and dry before application. Remove all chemicals, dirt, wax, and oil.

Double/Bubble Directions - Fold, Snip, Squeeze, Mix and Apply

Fold the DOUBLE/BUBBLE package along the center seal, snip the end, squeeze out the contents, mix thoroughly, and apply.

STORAGE AND HANDLING

Store DOUBLE/BUBBLE adhesives at room temperature in a dry environment. Extreme low temperatures may cause crystallization. Extreme high temperatures may degrade the properties.

Various cleaning solutions are available for cured and uncured epoxies and polyurethanes.

SAFETY

These materials are intended for commercial and industrial use only, and good housekeeping, safety, and cleanliness should be followed before, during, and after use.

Although the system contains low-volatility materials, care should be taken in handling. Use adequate ventilation in the work area.

These materials may cause dermatitis in susceptible individuals. Keep off the skin and out of the eyes. In case of accidental skin contact, wash thoroughly with soap and water. In case of eye contact, flush your eyes thoroughly with water and consult a physician immediately.

Vibra-Tite - 381 Gap Filling - Wire Tacking Cyanoacrylate, 20gm

You might also like