Double/Bubble® - Red#2 Extra Fast Set (non-sag) | 04008

Hardman's Double/Bubble® Non-Sag Extra Fast Setting Epoxy

• Description: Extra fast setting, non-sag (thixotropic) adhesive for quick repairs. Bonds to wood, glass, metal, stone, ceramics and leather.
• Typical uses: Ideal for quick, permanent, vertical and overhead repairs. For fixturing, tacking, sealing, gap filling and stacking in electrical and industrial applications.
• Work time: 3 minutes
• Handling strength: 15-30 minutes
• Color: White (translucent)
• Viscosity: Paste
• Part Number: 04008

HARDMAN Non-Sag Epoxy is a thixotropic, extra fast setting, two–component epoxy adhesive. It has a convenient mix ratio, excellent sag resistance when applied to vertical surfaces, and a smooth paste consistency. It is recommended for rapid repairs and electrical and industrial staking.

HARDMAN Non-Sag Epoxy is recommended for the following substrates:

HARDMAN Non-Sag Epoxy is ideal for quick, permanent, vertical, and overhead repairs. It can be used for fixturing, tacking, sealing, gap filling, and staking in electrical and industrial applications.

PACKAGING

The DOUBLE/BUBBLE package is a handy, dual-pouch, one shot, job-size packaging concept. It reduces the waste typically associated with using larger quantities of two-component adhesives. This unique packaging ensures that DOUBLE/BUBBLE adhesives are always factory fresh and accurately portioned for optimum adhesive performance.

Directions for Use

The surface must be clean and dry before application. Remove all chemicals, dirt, wax, and oil.

Fold the DOUBLE/BUBBLE package along the center seal, snip the end, squeeze out the contents, mix thoroughly, and apply. 

STORAGE AND HANDLING

Store DOUBLE/BUBBLE adhesives at room temperature in a dry environment. Extreme low temperatures may cause crystallization. Extreme high temperatures may degrade the properties.

Various cleaning solutions are available for cured and uncured epoxies and polyurethanes. 

SAFETY

These materials are intended for commercial and industrial use only, and good housekeeping, safety, and cleanliness should be followed before, during, and after use.

Although the system contains low-volatility materials, care should be taken in handling. Use adequate ventilation in the work area.

These materials may cause dermatitis in susceptible individuals. Keep off the skin and out of the eyes. In case of accidental skin contact, wash thoroughly with soap and water. In case of eye contact, flush your eyes thoroughly with water and consult a physician immediately.