Hardman's Double/Bubble® Blue General Purpose Epoxy
A long work-life adhesive for bonding wood, metal, ceramics, concrete, rubber, and plastics. For Golf, each packet will shaft a minimum of 3 clubs.
- Typical uses: Repair of tools, furniture, and sports equipment. an excellent adhesive for use with fiberglass cloth.
- Work time: 2 hours
- Handling strength: 8 hours
- Color: Amber
- Viscosity: Heavy Syrup
HARDMAN General-Purpose Epoxy is a two-component, long work life; room temperature cures epoxy adhesive designed for general-purpose applications. It exhibits high cohesive strength combined with excellent impact and vibration resistance. The cured system is effective over an operating temperature range of –34 °C to 71 °C (–30 °F to 160 °F). HARDMAN General-Purpose Epoxy is recommended for the following substrates:
The DOUBLE/BUBBLE package is a handy, dual-pouch, one-shot, job-size packaging concept. It reduces the waste typically associated with using larger quantities of two-component adhesives. This unique packaging ensures that DOUBLE/BUBBLE adhesives are always factory fresh and accurately portioned for optimum adhesive performance.
Directions for Use
The surface must be clean and dry before application. Remove all chemicals, dirt, wax, and oil.
Fold the DOUBLE/BUBBLE package along the center seal, snip the end, squeeze out the contents, mix thoroughly, and apply.
STORAGE AND HANDLING
Store DOUBLE/BUBBLE adhesives at room temperature in a dry environment. Extreme low temperatures may cause crystallization. Extreme high temperatures may degrade the properties. Various cleaning solutions are available for cured and uncured epoxies and polyurethanes EPOSOLVE® 299–R is a versatile clean-up solvent (non-red label) for both cured and uncured epoxies and urethanes. Gloves made of nitrile rubber or other impervious matter must be used with this product. A separate data sheet is available upon request. Refer to Material Safety Data Sheet for this product before using.
These materials are intended for commercial and industrial use only, and good housekeeping, safety, and cleanliness should be followed before, during, and after use. Although the system contains low-volatility materials, care should be taken in handling. Use adequate ventilation in the work area. These materials may cause dermatitis in susceptible individuals. Keep off the skin and out of the eyes. In case of accidental skin contact, wash thoroughly with soap and water. In case of eye contact, flush your eyes thoroughly with water and consult a physician immediately.