PRODUCT DESCRIPTION
Top Features:
- Improved circuit design, better components and lower electrical noise!
- DJI HD VTX Connector (Plug-and-Play / No soldering required)
- FC indicator LEDs for visual debugging
Specs:
- MCU:STM32F405
- Gyro:MPU6000
- Baro: NO
- Betaflight OSD: IFLIGHT OSD (AT7456E)
- Blackbox: 16MB
- UARTS: 6
- I2C serial: SDA / SLA pads
- Smartaudio / IRC Tramp VTX protocol supported
- LED controller: Yes
- Beeper pad: Yes
- Firmware target : IFRC-IFLIGHT_BLITZ_F405
- Mounting:20*20mm/φ4
- Dimensions:30.5*27mm
- Weight:5.0g
Wiring suggestion:
- UART 1 for VTX HD / Analog
- UART 2 for a Receiver
- UART 3/4 for GPS or other sensors that require a serial port
- UART 6 for ESC Telemetry
Tips
1. F405 MCU has not inner inverter
2. SBUS、CRSF、ELRS、IBUS、DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
4. F.port can be used, need to be connected to UART_TX2 and setup the inner inverter
Included Connectors (Plug-and-Play wire harness):
1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1 /5V/G/VI)
1xSH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)
1xSH1.0 6pin connector for Any Receiver or DJI(3V3/R2i/5V /G/R2/T2)
1xSH1.0 4Pin connector GPS (T4/R4/G/5V)
1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
4×0402 LEDs for FC STATUS (3.3V Red) / (Start Blue) / (5V Green)/(BAT Orange)
What's in the package?
1 x BLITZ Mini F4 Flight Controller
1 set of FC connectors (as above)
1 set silicon grommets