Henkel Loctite® Hysol® EA 9460F non-sag epoxy adhesive is a high impact-resistant formula that contains two components such as white liquid resin and black paste hardener, which should be mixed in a 1:1 ratio by volume or weight. The slight ammoniacal hardener has a boiling point greater than 300.2 degrees F. Flash point of this adhesive is greater than 300.2 degrees F for resin and 199.4 degrees F for hardener. The resin has a viscosity of 150,000 to 300,000 centipoises whereas hardener has 100,000 to 250,000 centipoises. Both the resin and hardener having less than 10 grams per liter VOC contents evaporates quickly. This epoxy compound takes 72 hours for curing and requires 40 to 65 minutes for application. It withstands a tensile strength of 4400 psi and a shear strength of 3500 psi. This product comes in a 5-ouncedual kit. It has a specification gravity greater than 1 for resin and 1.31 for hardener. It comes with an elongation of 0.035. This adhesive has a storage temperature range of 8 to 21 degrees C.
