I am a returning customer.
Password forgotten? Click here.
I am a new customer.
By creating an account at Pilots HQ LLC you will be able to shop faster, be up to date on an orders status, and keep track of the orders you have previously made.
This onsite fuel test can be conducted wherever fuel is manufactured, stored, distributed or consumed. What makes this product unique is that it is capable of detecting all known organisms which grow in fuel and in fuel systems within just 10 minutes, unlike current growth-based tests, which require a minimum of 72 hours to provide any results.
The objective of this test is to provide rapid screening of fuel samples, giving a quick and accurate assessment of microbiological growth in the fuel tank. It measures the amount of active growth in the sample and provides actions and alert levels. All of this is achieved from the one FUELSTAT® resinae PLUS test kit and does not require any special skills or equipment.
There are a number of different types of microorganisms that can grow in certain types of fuel. The biggest problem is presented by a filamentous fungus called Hormoconis resinae, (H Res). Previously called Cladosporium resinae, and more commonly referred to as “the diesel bug”. H Res is a fungus that thrives in diesel fuel. It requires only a minimal amount of water content in the fuel to grow and will cause filter blockages, component failure and tank corrosion if left unchecked. Bacteria and other types of fungi, particularly some yeasts can also cause problems in fuel tanks, usually acting as a consortium.
The objective of this test is to provide rapid screening of fuel samples (water in fuel or fuel), giving a quick and accurate assessment of H Res, bacteria & other fungi including yeasts in the fuel tank. This test is unlike current growth-based tests which require a minimum of 72 hours to provide any results. The test measures the amount of active growth in the sample and provides actions and alert levels.
The FUELSTAT® resinae PLUS DIESEL test measures the amount of different types of contamination: H Res, bacteria and
fungi actively growing in the sample and reports that as the weight of material in the sample. This is a newer, more accurate
measurement system than the old Colony Forming Unit (CFU) count.
The test provides results based on a traffic light scenario:
Why Use FUELSTAT®?
FUELSTAT® complies with ASTM D8070-16
Conidia Bioscience Ltd are pleased to announce that FUELSTAT® complies to ASTM D8070-16 as of Monday 5th December 2016
Going forward this will enable all parties testing for the presence of Microbial Contamination or otherwise known as any combination of, but not limited to the following; Bacteria, Fungi, Hormoconis resinae (H-res), Diesel Bug or Jet Fuel Fungus to be able to rapidly test on-site and provide closer adherence to the below ASTM recommendation thus reducing the potential for sample degradation.
ASTM D6469 – 14, Para 8.3 – 8.6, Standard Guide for Microbial Contamination in Fuelsand Fuel Systems section advises:
It is recommended that ideally testing should be completed on site within a few minutes of sampling. Recognising that this is not always possible it states that samples should be kept on ice in transit and tested within 4 hrs but no longer than 24 hrs after sampling. Samples stored at higher temperatures, or for longer times, can show the presence of microbial contamination that does not represent actual fuel system conditions.
Testing of Fuel within Standby Generators is also recognised by British Standards Institute with update of BS 5410-3:2016
The British Standards Institute has just issued an update to BS 5410-3:2016 and to our knowledge is the first national standards body to reference testing for fuel quality and suitability indeed Section 18.10 headed Fuel Filtration – Filters states:
Note 1 – Since the introduction of BioFuel (FAME) into fuel tanks the quality and life expectancy of fuels has been adversely affected as FAME is hydroscopic so any water in the fuel goes into suspension. This water can lead to injector pump damage and facilitate the growth of bacteria which blocks conventional filters.
Note 2 – Removing as much water as possible preserves the quality of the fuel.
There should be a fuel polishing system to help maintain the fuel quality. If there is no polishing system the fuel should be tested every three months.
Fuels for emergency generators should be tested every six months for quality and suitability.
FUELSTAT® does not have any special handling, transportation, storage or disposal requirements (the fuel sample, should be disposed of as per individual company policy) and nor does it require any special skills or capital equipment, so why not protect your assets with FUELSTAT®?