Daubert Chemical - Corrosion Prevention Compound, Gallon Can | Tectyl 900
TECTYL 900 is a water displacing, low viscosity ubricating oil and corrosion preventive compound. TECTYL 900 is approved to Federal Specification MIL-PRF-32033, QPL Reference Number LP-7062. TECTYL 900 provides protection to ferrous and nonferrous industrial parts during storage and covered transit.
The maximum performance of TECTYL 900 can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50-95°F(10-35°C) at the time of product application.
TECTYL 900 is formulated to be used as supplied. Ensure uniform consistency prior to use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of solvent during use, contact Daubert Chemical Company. DO NOT THIN TECTYL 900. Incorrect thinning will affect film build, dry time and product performance. Daubert Chemical Company recommends that the ambient and product temperature be 50-95°F(10-35°C) at time of application. TECTYL 900 can be spray or dip applied.
TECTYL 900 can be removed with TECTYL HPS solvent borne thinner, vapor degreasing, hot alkaline wash, or low pressure steam. TECTYL 900 can be removed from fabrics by normal dry cleaning procedures. Avoid the use of chlorinated or highly aromatic solvents when removing from painted surfaces, as these solvents may adversely affect paint.