NuGear SC Heavy-Duty Cleaner for Hot Immersion Tank | 55GL

Nuvite Chemical

PC220955GL

Regular price $902.48

Shipping calculated at checkout.

HEAVY-DUTY ENGINE & COMPONENT CLEANER | 55 Gallon Drum

Aqueous cleaning compound for aircraft engine & component degreasing operations

NUGEAR SC is a heavy-duty aqueous cleaning compound for exterior aircraft engine and component degreasing applications. NUGEAR SC is used as a wet wash or in a hot immersion tank and spray cabinet application.

  • Superior wetting and soil penetration
  • Conforms to Airframe OEM standards and specifications
  • Rolls Royce, General Electric, and Pratt & Whitney SPMC 151, PMC 5404, and PMC 1481 approved

GOT GREASE?

Say hello to NuGear® SC- A powerful degreaser cleaner for engines and engine components. Specially formulated for use with immersion tanks and spray cabinets, NuGear SC is also a top choice for heavy degreasing wheel wells and aircraft blades. This dynamic cleaner can be used straight out of the bottle, but even in a diluted state, NuGear® SC is plenty strong to handle tough degreasing jobs. NuGear SC can be diluted, depending on the extent, condition, and type of soil to be cleaned, and kept in a spray bottle for hand-cleaning operations. Since hand wipe-downs do not require a final water rinse, some fans prefer it followed by a clean towel and force drying. NuGear® SC is certified for aviation and has approval from many OEMs. It is eco-friendly, so rinsing the product off is unnecessary, as is collecting the run-off.


NuGear SC Approvals

  • SMI Tests & Approvals
    • AMS1650
    • ATSMF945
  • OEM & Airline Approvals
    • GE
    • Honeywell
    • Pratt & Whitney
    • Rolls Royce
    • Embraer
    • American

NuGear SC Procedure

HAND CLEANING/LOCAL APPLICATION

  1.  Dilute NuGear SC 1:4 to 1:10* with water.
  2. Apply to the surface in a shallow wash tank or by mop or spray.
  3. Loosen the surface material with a non-metallic bristle brush, reapplying the solution continuously.
  4. Follow with a water rinse and reapply if necessary.
  5. Wipe dry with a terry towel.

HEAVY-DUTY CLEANING/HOT IMMERSION TANK/SPRAY CABINET

  1. Use NuGear SC full strength or dilute 1:2 to 1:4* with water
  2. Allow soaking at 120 - 140°F (49 - 60°C).
  3. Effective concentration can be maintained with the periodic addition of fresh NuGear SC.