Double/Bubble® - Blue/Beige Semi-Flexible, High Shear Strength Urethane | 04023

Hardman's Double/Bubble® Semi-Flexible, High Shear Strength Urethane Shore Hardness D-85

Extra fast setting, semi-rigid. Combines very high lap shear strength with good peel strength.

• Typical uses: For repair of urethane RIM parts. Recommended for the repair of rubber hoses and flexible electrical connections.
• Work time: 3-5 minutes
• Handling strength: 1 hour
• Color: White
• Viscosity: Heavy syrup

Urethane D-85 is a rigid, two–component, extra fast setting, polyurethane structural adhesive system. It displays an excellent shear and peel strength combination with good impact resistance. It is highly recommended for bonding engineering thermoplastics, SMC, laminated surfaces, and repair of urethane molded parts.

Urethane D-85 is recommended for the following substrates:

Urethane D-85 can be used to repair urethane parts. It is recommended for the repair of rubber hoses and flexible electrical connections.

Packaging

The DOUBLE/BUBBLE package is a handy, dual-pouch, one-shot, job-size packaging concept. It reduces the waste typically associated with using larger quantities of two-component adhesives. This unique packaging ensures that DOUBLE/BUBBLE adhesives are always factory fresh and accurately portioned for optimum adhesive performance.

Directions for Use

The surface must be clean and dry before application. Remove all chemicals, dirt, wax, and oil.

Fold the DOUBLE/BUBBLE package along the center seal, snip the end, squeeze out the contents, mix thoroughly, and apply. 

STORAGE AND HANDLING

Store DOUBLE/BUBBLE adhesives at room temperature in a dry environment. Extreme low temperatures may cause crystallization. Extreme high temperatures may degrade the properties. Various cleaning solutions are available for cured and uncured epoxies and polyurethanes.

SAFETY

These materials are intended for commercial and industrial use only, and good housekeeping, safety, and cleanliness should be followed before, during, and after use.

Although the system contains low-volatility materials, care should be taken in handling. Use adequate ventilation in the work area.

These materials may cause dermatitis in susceptible individuals. Keep off the skin and out of the eyes. In case of accidental skin contact, wash thoroughly with soap and water. In case of eye contact, flush your eyes thoroughly with water and consult a physician immediately.